New Home Builders Port Melbourne, tight sites done right
Port Melbourne is the hardest kind of site we build on, and the difficulty is logistics rather than design. Narrow frontages, no side access, parked cars and neighbours a metre away mean the question is not only what to build but how anything gets on and off the site at all.
What kind of land is Port Melbourne?
Historically a working port and industrial suburb, which shaped everything about how it was subdivided. Cottages were built close to the docks for the people who worked in them, on narrow allotments packed tightly together, and much of that pattern survives.
Around that core sit later layers: the interwar Garden City housing, postwar development, and the more recent Beacon Cove residential area near the waterfront. The result is a suburb of considerable variety within a small area.
For anyone building, the defining characteristic is width. Frontages of six or seven metres are common in the older streets, sometimes less. Many properties have no side access whatsoever, which means every material and every load of spoil comes through the front or over the top.
Heritage protection applies across parts of the suburb, particularly to the surviving cottage rows and the Garden City area, and it is the first thing to establish rather than the last.
How do you build on a site with no access?
Six practical realities of constructing on a tight inner block, all of which need planning and pricing before work starts.
Craning over the roof
Where there is no side access, structural steel, trusses and sometimes the entire slab reinforcement arrive by crane from the street.
Road occupation permits
Standing a crane or a truck on a public street requires council approval and traffic management, and both take time and money to arrange.
Nowhere to store materials
Deliveries have to be scheduled to arrive when they are needed rather than stockpiled, which demands tighter programme management.
Protecting the neighbours
Where you build within a metre of an adjoining wall, protection work notices and structural care for the neighbouring building are legal obligations.
Spoil removal
Excavated material leaves in smaller loads more often, because a full size truck may not be able to position on the street.
Realistic programmes
Everything takes longer on a constrained site. A programme copied from a suburban block will not survive contact with a Port Melbourne street.
What should you check on a Port Melbourne property?
Six questions that determine whether a site is straightforward or genuinely difficult.
How do you get light into a narrow block?
Side windows are largely unavailable, because the boundaries are either built to or close enough that any window would look straight into a neighbour. So light has to come from above and from either end.
The devices that work are consistent: a void over the living area with high level glazing, skylights placed where they reach into the middle of the plan, a courtyard cut into the footprint to bring light and air to a central room, and glazing at both the front and the rear.
Storage has to be designed in rather than found later, because there is no garage overflow and no shed at the back. Full height joinery, under stair volume and considered laundry planning make the difference between a narrow house that works and one that feels cramped.
Where heritage protection applies to the facade, the usual approach is retaining the front rooms and building a contemporary volume behind, which is a well established pattern in inner Melbourne and frequently the only approvable one.
What draws people to Port Melbourne?
Position, above everything. The suburb sits within a few kilometres of the centre of Melbourne with a beach along one edge, which is a combination almost nowhere else in the city offers.
Bay Street provides the retail and dining spine, and the light rail route running along it into the city is one of the more useful transport connections in inner Melbourne. Station Pier anchors the waterfront and remains the arrival point for the Tasmania ferry.
The foreshore, the bay path and the beach itself are used year round, and the industrial heritage of the area has left a built character that later suburbs cannot manufacture.
The trade for all of it is land. Blocks are small, gardens are modest and building on them is genuinely more difficult than in a suburban street. Buyers who choose Port Melbourne have decided that the position is worth the constraint, and in our experience very few of them change their minds.
What are the different parts of Port Melbourne?
A small suburb containing several quite distinct kinds of housing, each with its own building implications.
The cottage streets
Narrow allotments packed close together near the old port. Heritage protection is common, and access is at its most difficult here.
Garden City
Interwar planned housing with a recognised layout and its own protections. Blocks are more regular but the character controls are real.
Beacon Cove
Later waterfront development with a different built form again, and none of the heritage constraints of the older streets.
Former industrial pockets
Land that has changed use over time, where ground conditions and previous activity warrant proper investigation before purchase.
Which layer your property sits in determines the heritage position, the access strategy and the design approach, so it is the first thing we establish.
Building a new home in Port Melbourne
Give us the street number and we will measure what can get onto the site, check the heritage listing and tell you what is realistically buildable.
Ask about your siteCan you build on a block with no side access?
Are Port Melbourne cottages heritage protected?
How much does restricted access add to the cost?
Can a narrow house still feel light?
Should I be concerned about ground conditions given the industrial history?
Building in Port Melbourne?
Send us the address. We will measure the access, check the heritage position and give you a programme and price written for the constraints of the site.